Wondering how to use the Spectra breast pump?
Then let us help you with our guide on how to use spectra pump!
We know how tricky breast pumps can be, especially if you are new to them.
They can seem overly confusing to use and leaves many of us confused and unsure of what we should do with them.
Before you know it, you find yourself stressed and unable to pump milk, worrying about how you will move forward and ensure you have a supply for your baby.
Well, that’s why we’re here to walk you through how to use Spectra s2 and how to use Spectra s1.
Just keep reading to find out how you can use this pump in a few easy steps!
This post contains affiliate links. See our full disclosure here
How To Use The Spectra Breast Pump
Firstly, it’s important to clarify that how to use the Spectra s1 and how to use the Spectra s2 will not differ other than the battery source.
As the Spectra s1 is portable you will need to ensure the battery is charged first or it is plugged into a power source. The Spectra s2 is not portable, thus will need to be plugged in to a power source in order to use.
You can read more about the differences in our Spectra S1 vs S2 review.
So, let’s dive in and find out how to use the Spectra Breast Pump.
How to use Spectra s1 and How to use Spectra s2
Before using the pump, we strongly recommend reading the user manual beforehand.
This is the best way to get acquainted with your new pump and find out how to use it.
There might be some differences in our advice today, so be sure to check the user manual.
If you do find yourself having any issues, it’s also worth checking out any online forums or online tutorials.
It’s easy to feel alone when you first start using a breast pump, but there is a whole community of new parents out there in the same situation.
If you reach out, you are sure to find support!
Now, let’s take a look at how you can use the pump today. Just follow our step-by-step guide below.
Step 1 – Set Up Your Pump
The first step when using the Spectra Breast Pumps is to set the pump up.
This can take a few minutes to do, especially on the first attempt.
Start with the backflow protector, placing the silicone membrane inside the clear plastic pieces (the uppercase and lowercase).
Next, take the tubing and connect one end to the breast pump and the other to your backflow protector.
For those single pumping, you only need to connect one piece of tubing.
If you are double pumping, you will want to connect two pieces of tubing.
Now, connect the duckbill valve to the other breast shelf, twisting the valve onto the opening of the breast shield.
Next, twist the bottle onto the breast shield. To finish setting up the pump, connect the breast shields to the backflow protectors.
Here you will want a snug fit to ensure there are no leaks! To start pumping, get yourself comfortable and plug the breast pump in.
You will want to center your nipples in the breast shields before beginning. Connect the bottle to the breast shield and secure them tightly.
You don’t want any leaks here! Once you are comfortable, you can begin pumping.
Step 2 – Setting Up Your Spectra Breast Pump Settings
Now that you have set up your Spectra Breast Pump, you can now set up the various settings on the pump.
These settings include the speed, suction level, and flow rate.
You can also choose between massage and expression mode, helping you find one that is comfortable for you and should help get the most out of your milk supply.
We recommend setting up the pump before pumping as this will allow you to get an idea of how each setting works.
Once you have done this, you can adjust the settings until they work best for you.
Everyone is different when it comes to finding the best setting, so don’t put any pressure on yourself here.
It might take you a few attempts to find the best and most comfortable setting for you!
Step 3 – Starting Your Spectra Breast Pump (Using The Manual)
After you have adjusted your Spectra Breast Pump settings, it is time to start pumping.
As mentioned above, you will need to make sure that the pump is connected to your baby’s bottle.
Then all you need to do is press down on the button and the pump will begin to work.
The first thing you will see is the indicator light flashing green.
This means that the pump is ready to go. Keep pressing the button and the pump should continue to work.
When you feel that the pump is working well, you can stop pressing the button and let it do its thing!
Now, the pump should be fairly quiet when it is working.
If you find that it’s too loud, then it’s best to turn the pump off and check that all the parts are assembled correctly.
You can find a detailed diagram in your user manual if you need it.
Step 4 – Stopping Your Spectra Breast Pump
After you have pumped enough milk, it is time to stop the pump. Simply release the button and wait for the pump to stop.
Once the pump stops, you can remove the tubing from your baby’s mouth and nipples.
Now that you have stopped the pump, you can disconnect the pump from the bottle.
Make sure to wash your hands after you have finished pumping.
Step 5 – Cleaning Your Spectra Breast Pumps Parts
When you are done using the Spectra Breast pump, it is important to clean it properly to prevent bacteria from growing.
You can do this by following our step-by-step guide below.
- Remove the cap from the top of the pump.
- Turn off the power switch located near the base of the pump.
- Wash the entire pump with warm water and soap.
- Rinse the pump thoroughly.
- Dry the pump completely.
- Re-attach the cap to the top of the pump and turn the power back on.
- Put away the pump in its original packaging.
Final Thoughts on How To Use a Spectra Pump
And there you have it, how you can use your Spectra Breast Pump with ease!
Whether you have the S1 or S2, these instructions will help you use the breast pump and collect the milk you need.
Whether you intend to use the milk there and then, or freeze it to make up a supply for your child, you are sure to be happy with the pump.
Don’t forget to make use of the user manual and any tutorials or forums online that can help you become an expert with your pump today!